TigerDrive


TigerDrive™

TigerDrive™This unit replaces the recoil starter or onboard starter found on many R/C Cars, trucks, boat and helicopters, and permits use of a standard hand-held starter. This eliminates broken ropes and burned out onboard starters, and allows the engine to be turned faster for easier starting. The drive direction can be oriented in four directions to accommodate exhaust and chassis arrangement.

There are models to fit most engines from .12 to .46, and installation is very easy -- only three or four screws. The gears are steel, the frame is aluminum and the bearings are bronze and Steel Roller for durability

See the TigerDrive Engine Cross Reference Page for a cross reference listings of specific engines. Also, see the TigerDrive FAQ page for answers to common TigerDrive questions.
S680 6 mm Clutch version. Fits most engines .12 to .25 with a 6 mm back shaft, such as HPI® engines, CEN®, OPS™, Duratrax®, and Associated®. Also fits many other engines, including some to .46.
S681 8 mm Clutch Version Fits most pull start OS® engines to .21
S682 6 mm Clutch version. Fits the new 2.5 T-Maxx engine and other Drop-Ins using the EasyStart system
S683 8 mm Clutch Version Fits the OS DTX 18 engine for the T-Maxx
S684 8 mm Clutch Version with Adapter Plate Fits OS® .32 Heli and Marine engines
S685 6 mm Shaft Version Fits the Hyper/OFNA .21 eight port
S687

6 mm Shaft Version with Adapter Plate

Fits Dynamite Mach .26 and .32 Marine engines
S689 6 mm Shaft Version Fits engines with an internal 6 mm clutch, such as .12 to .25 Dynamite®.
S691 6 mm Shaft Version Fits engines 6 mm internal clutch engines with backplates that have a large external boss
S693 8 mm Shaft Version 90 Degree Reverse Version fits most engines with an internal 8 mm clutch
S694 6 mm Long Shaft Version 90 Degree Reverse Version fits some engines with an internal 6 mm clutch
S695 6 mm Shaft Version 90 Degre Vesion fits MACH 15 with an internal 6 mm clutch
TigerDrive Inline Version. These fit most cars and trucks that have the engine mounted crossways in the chassis or have access through the rear suspension. These all-metal units can be usually mounted four ways.
S702 6 mm Clutch Version Fits most engines with a 6 mm rear output shaft
S703 8 mm Clutch Version Fits most engines with an 8 mm rear output shaft
S704 6 mm Shaft Version Fits most engines with a 6 mm internal clutch
S705 8 mm Shaft Version Fits most engines with an 8 mm internal clutch
 

TigerDrive Special Edition.

S707 6 mm Shaft Fits Duratrax Warhead
S708 6 mm Shaft Fits OS .30 VG (P)-X

 

TigerDrive Accessories

NEW! Dry Ice Racing Lube. This special lubricant is made for exposed gears and bearings. It cleans, lubricates and leaves a dry PTFE-based coating that helps repels dirt. No. S699

TigerDrive Covers. This set features heavy duty nylon covers in various colors to match your vehicle. Fit all TigerDrives except the S685 and S691. No. S688
TigerDrive Drive Wand. The hardened steel ball drive fits all TigerDrives. The aluminum adapter fits most hand held starters, including Sullivan Hi-Tork and Dynatron. No. S686
TigerDrive Shim Kit. 4 Customs shims for TigerDrive applications requiring for clearance. .020" in thick each. No. S696
TigerDrive Aluminum Pro Cover. For High Strength and extra cooling. Fits S680, S681, S682, S683, S684, S687 & S689 TigerDrive. No. S690



 

GETTING BETTER IDEAS OFF THE GROUND.

Problems? Contact the Webmaster@sullivanproducts.com
Copyright© 2008 Sullivan Products
Sullivan Products
1 North Haven Street
Baltimore, MD  21224
Phone: 410-732-3500
Fax: 410-327-7443