We apologize if you have made a web order or e-mailed a tech question and have not received our normal quick response. We are following all Federal and State wide limitations during the virus as well as we are dealing with an internal computer issue. Rest assured we are still shipping, albeit with a skeleton crew. If you have a question about a previous order or would like to make an order or ask a tech question, please call us @ 410-732-3500.
Now you can upgrade your ARF’s and Foamies cheap Chinese hardware with our world class 2mm and 3mm hardware. We now offer:
- Gold N Clevis’, S529- (2mm) S530- (3mm)
- Ball Connectors, S592- (2mm) S593- (3mm)
- Assorted double end threaded rods, S540- (2mm) S541- (3mm)
The new complete control linkage system for 3D and Giant Scale aircraft is here! This line of 6-32 hardware is manufactured in aluminum and stainless steel. Our specially designed aluminum rod is internally threaded 6-32” on both ends with an ID of .107”, which is ideal for tapping 6-32”.
Our ProRod system is engineered to have no play and maxed out our test equipment handling 200 lbs with no problems. Many other vital components of a plane will fail before 200 lbs of pressure is exerted, meaning our hardware will never be a point of structural concern.
Upgrade your plane at your favorite Sullivan Supplier!
This is everything you need from servo arm to surface.
12” ProRod is easily cut to specific size with a fine Zona saw or jigsaw & quickly tapped to 6-32”
6-32” Ball Connector allows off axis set up and quick tooless adjustment
Designed with 1” stand off for large plane installation and easily adjusts and fits on included 8-32” bolt
Strong, lightweight stainless steel 6-32” double end thread; 2”, 4”, 6”, 8”, and 10”
Stainless steel with internal machine sharpened edge for quick easy cutting in wood, foam and fiberglass
Hardwood inserts for all flying surfaces with machined counter bore for quick 8-32” bolt installation
4 x 1” 6-32 threaded stainless steel studs
8 x 6-32” stainless steel hex nuts
Marcy’s Mini Wheel Chocks. Marcy Jones invented these wheel chocks in 2003 and has been testing and perfecting them ever since. Depending on wheel size and gear angle, the chocks can fit either inside or outside of the tires and will accommodate most axle sizes. Aside from looking super cool, these wheel chocks have lots of other great benefits too:
- Maximize security and safety during plane transport
• Conserve space in trailers, trucks, vans or storage areas
• Eliminates the risk of getting flat spots on tires
• Prevents rolling during hardware or radio installations
• Use in any type of airplane, tail dragger or tricycle
• For up to 2.5″ Tires
• Made of high strength anodized aluminum for a lifetime of use